Daily Maintenance of Pulse Dust Collector
The pulse dust collector is a high-efficiency fine powder collection artifact. It is made of high-density fiber material. After using the bag for a period of time, due to the effects of sieve filtration, collision, retention, diffusion, static electricity, the surface area of the filter bag is layered. Dust, the condition of the dust collector should be checked regularly. If the bag is found to be broken, the dust bag should be replaced in time.
After using the pulse dust collector for a period of time, it is necessary to observe its pressure supply situation in time. Considering the continuous blowing of the dust bag room, the equipment is prone to periodic fluctuations, resulting in pressure loss of the dust collector. Therefore, pay attention to its pressure response during use, and do a good job of cleaning and maintenance of related equipment.
1. Generally, check the cleaning mechanism every 6 months. If the electromagnetic pulse valve fails, it should be removed in time. If there are impurities and moisture inside, it should be cleaned. If the diaphragm is damaged, it should be replaced in time.
2. Use the timing type cleaning controller, and periodically check whether the cleaning cycle is accurate, otherwise it should be adjusted.
3. When using a fixed-resistance pulse controller, the working condition of the pressure switch should be checked regularly, and the pressure measuring port should be blocked and cleaned.
Leave a Comment